|
The PD 6500i's Access Control Panel is
designed for use by authorized personnel with
specific, multi-level security codes. It allows
authorized users to change settings such as
detection Program and Sensitivity. Security of
the detector's settings is maintained with a
non-resettable sequence code, which indicates
every attempt at access to the settings. A
tamper alarm sounds within 10 seconds after the
Access Touchpad is pressed, unless a proper
access code is entered.
The PD 6500i
maintains all settings even when disconnected
from power and does not require recalibration
each time the unit is turned OFF and back ON. No
battery is required for memory retention. While
the unit is in operation, a self-test of all
systems is performed continuously with any
failures or problems immediately reported on the
LCD display. |
|
Garrett PD 6500i specifications..
- Operating Temperatures
-4°F (-20°C) to + 158°F (70°C); Humidity: To 95% non-condensing
- Power
Fully automatic 100 to 240 VAC, 50 or 60 Hertz, 5 watts; no rewiring,
switching or adjustments required. Power supply meets UL, CSA, TUV and
VDE standards.
- Weatherproofing / Foreign Object Protection
Standards
Meets IP 55, IEC Standard. "Degrees of Protection provided by
Enclosures," IEC 529.
- Tamper-Proof
All settings are secured with a key lock and two levels of access
codes. Further security is accomplished with a cabinet lock which
prevents unauthorized access to physical cables, connectors and
electronics.
- Construction
Attractive scratch and mar-resistant laminate. Detection Heads and
Support: Heavy duty aluminum.
- Control Outputs
Solid state switches (low voltage AC or DC) for operating external
alarms and control devices.
- Traffic Counter
Counter tracks the number of patrons that have passed through the
detector, the number of alarms and calculates alarm percentage.
- Synchronization
Dual channels and DSP circuitry allow several PD 6500i's to operate
simultaneously in close proximity to one another.
- Interference Suppression
Special Garrett DSP built-in circuitry eliminates effects from x-ray
monitors and other potential electrical interference sources.
- Programs
Sixteen (16) independent programs designed to meet all
installation-specific requirements including the new TSA Enhanced
Metal Detector (EMD) System requirements for all U.S. airports.
- Alarms
Audible tone and volume adjustable. Bright LED visual alarm.
- Target Pinpointing Lights
Thirty-three (33) distinct zones are displayed with two (2)
independent columns of LED's located on exit side of PD 6500i.
- Pacing Lights
International symbols
- Warranty
Limited 24 months, parts and labor
- Dimensions
| Interior |
Overall |
Exterior |
Shipping |
| Width |
30"
(0.76 m) |
35"
(0.9 m) |
35.5"
(0.9 m) |
| Height |
80"
(2 m) |
87"
(2.2 m) |
92"
(2.3 m) |
| Depth |
23"
(0.58 m) |
23"
(0.58 m) |
6.5"
(0.17 m) |
|
|
next......